top of page

Pnuematic Needle Scalers

Models:

Texas Pneumatic TX1BLTN

Needle Scaler - $269.00

Air Needle Scaler

Specifications:

Weight = 6 lb. / 4 oz.Length = 17″ w/ 5″ needles

CFM Consumed = 12 / CFMBore = 1″

Stroke = 1-1/8″/BPM = 4600 / Inlet = 1/4″ NPT

Gison Pneumatic GP-851N  Needle Scaler - $159.00

Air Needle Scaler

(OUT OF STOCK)

NS-1500V Vacuum
Needle Scaler -
 $425.00

NS-1500 Vacuum 
Attachment Kit - 
$195.00

Your needle scaler goes here

Additional information about the NS-1500 Vacuum Attachment can be found here.

Lever Throttle Needle Scaler that has been proven throughout industrial job sites, as well as construction and marine repair facilities. Made in the U.S.A. , completely convertible from needle to chisel scaler and vice versa, and parts availability almost guaranteed.

Needle scalers adjust to any surface contour automatically. 

Tool Applications consists of; de-rusting and cleaning of metals, peening of welded joints, cleaning welding slag, removing barnacles, removing paint, rust, chipping stone, and concrete and brick.

The Lever Throttle Needle Scalers  are used throughout industrial job sites, as well as construction and marine repair facilities. 

Used for paint, barnacle, rust removal, along with cleaning welding slag, peening joints, and more!

DDM Needle Scaler Vacuum Systems are designed to comply with U.S. Lead Paint Abatement Regulations. 

 

This is our standard unit.  Ready to plug and play besides an operator and a HEPA Vacuum. Comes with a TX1BLTNS Needle Scaler and Vacuum Attachment Kit along with an inline oiler.

The paint debris generated by the needle gun is contained within a flexible nose piece and exhausted into your HEPA vacuum. The breathing zone exposure for this system has been measured under 8ug/m3 That's 8 micrograms of particles per cubic meter of breathing space. Far below the action level of 30ug/m3 requiring the use of breathing devices. The Time Weighted Average of exposure hours should also be calculated. If you are removing lead paint, you need to designate an employee to monitor employee exposure.

If you already have enough needle scalers in the tool room you can order an NS-1500 Vacuum Attachment Kit here. Comes with our Vacuum Attachment Kit and an inline oiler. That works with TX, IR, and CP needle Guns. 

 

Just tell us which scaler you want to add this attachment kit to and we'll make sure it works when you get it. The needle scaler must be configured something like the photo below. (in-line/no pistol grip)

Also Check out our NS-3500V Vacuum Needle Scaler Indoor Kit and NS-2500V Vacuum Needle Scaler Outdoor Kit

Vacuum Needle Scaler Kit for interior space lead abatement
NS-2500V Vacuum Needle Scaler Kit for lead abatement

Here's some information for understanding lead abatement regulations

Electric Needle Scalers

NS-4500 Electric Needle Scaler

Models:

NS-4500 Electric

Needle Scaler  - $875.00

24"

Utilizing the Nitto Kohki EJC-32A, a tool that has been in production for over 25 years, it's solid as a rock and was designed as an electric needle scaler not as a rotary hammer drill with a scaler attachment. Needle scalers adjust to any surface contour automatically.​ Tool Applications consists of; de-rusting and cleaning of metals, peening of welded joints, cleaning welding slag, removing barnacles, removing paint, rust, chipping stone, and concrete and brick.

NS-4500V Electric

Vacuum Needle Scaler  - $1,085.00

Vacuum electric needle scalers

The NS-4500V is perfect for those small pick-up jobs where something got missed or it's an extremely small job to begin with.  You'll notice the absence of a typical vacuum brush at the end of the nosepiece.  During testing we discovered it was unnecessary.  The vacuum will actually pickup debris from about a 1/2" around the perimeter of the nosepiece.  You can shape this nosepiece with your hand to conform to random shaped surfaces.  Our attachment (DDM NS-1500V) has been successful since 2001 on other pneumatic needle scalers so our engineers adapted it to fit the Nitto Kohki EJC-32A.  Lead abatement testing shows 8mg of particulate per cubic meter of   This tool has been in production for over 25 years, it's solid as a rock and was designed as an electric needle scaler not as a rotary hammer drill with a scaler attachment. 

The NS-4500V works in conjunction with your HEPA vacuum or you can make life simple by using our NS-5000V Backpack HEPA vacuum as shown in the photo.  This vacuum has an additional 110V plug at the waistband to plug in your vacuum needle scaler. The NS-4500V is shipped complete with no assembly required. Weight with vacuum attachment is 11lbs. Requires 100-120 CFM vacuum. Utilizes 15 piece needle set unlike the common 19.

NS-4500/V Data

30 minutes full on trigger time and 30 minutes rest.  This is just a guideline.  If your ambient temperature is +20 degrees you'll rest before the tool needs to.  Pay attention to the warmth of the tool.  That's the same for any electric tool.

bottom of page